Torp TC500 Controller for Talaria Sting MX3 / MX4 / R

This Torp TC500 controller will work with your non-bypassed OEM Talaria battery to produce 8kw on an MX3 (up from 6kw stock) and 11.5kw on an MX4 (up from 8kw stock).

If you plan to use your OEM battery, but want more power, this is the controller to get!

Somehow Torp managed to retain all OEM battery BMS functions and will intelligently monitor voltage sag (no cut outs), so you’ll have more power at all times.

You can retain all OEM functions (kickstand sensor, brake sensors, kickstand sensor) and continue to use your OEM speedometer/display (no additional display needed). The mobile app has a ton of features and the controller is self-tuning. This is quite-simply put, about as plug-and-play as it gets.

INCLUDED IN THE PACKAGE:

-1x TC500 Controller
-1x wire harness
-1x plastic shield
-screws and tolls needed for installation
-4x stickers
-short instructions

v1 Specs:

MX3: 8kw on an oem non-bypassed MX3 battery. 13.5kw is possible on an aftermarket 60v battery and 17kw on a 72v battery.

MX4: 11.5kw on an oem non-bypassed MX4 battery. 15kw is possible on an aftermarket 60v battery and 18kw on a 72v battery.

Important: If you plan to use the E-watt / Ebmx 72V battery on your Talaria MX3/MX4 with a Torp controller, contact Torp support for installation guidance. Do not install the controller before contacting to prevent equipment damage!

IMPORTANT: Currently the Torp controllers can not communicate with the stock Talaria batteries produced by SCUD POWER BATTERY EUROPE OFFICE.  Lack of communication with the battery means that currently max power with this battery is a little above the stock power (as opposed to 11.5 kW with the stock Talaria battery produced by Greenway). Other controller functionalities are intact.

Please check the label on your battery before ordering!

The new generation TC500 2.X (v2) controller comes with integrated launch and lift assist hardware enabling advanced stability control for perfect wheelies and enhanced riding dynamics (Available via App update by Mid-February 2026), while automotive-standard throttle support and over-current protection safeguard performance. Next-generation components keep it resilient and reliable ride after ride.

The max power with the stock battery on Talaria MX4 is 11.5 kW and with MX3 is 8 kW.
Compatible with the stock Talaria and aftermarket (60 V , 72 V and 80V) batteries. Easy to install and even easier to adjust according to your preferences using the Torp App!

v2 Specs:

-Field-oriented control (FOC)
-Supported batteries: from stock 60V up to 80V nominal 22S (92,4V fully charged)
-Max Power: 25kW*
-Sensored (HALL Encoder) and sensorless control
-Max Battery Current: 350 A

With Torp controllers, all stock Talaria features will be preserved (stock Talaria Display, kick-stand sensor, crash sensor, power mode button, and brake switch) except for the start button.

* Torp is in the EU, so import duties and taxes are required. We have already paid them, which is included in the price.